All caps are die stamped from 11 gauge (1/8″) cold-rolled steel. They are available in the following sizes dome and flat:

• Weld-on clips are formed from 3/16 inch by 3/4 inch hot-rolled flat stock.
• Nail-on clips are formed from 1/8 inch by 1 inch hot-rolled flat stock.
• 3/8″ holes or 1/4″ holes, which ever you’d prefer.

• Dead Bolt Pin Latch is fifteen inches long and is designed to be a weld-on component.
  
• The pin is 1 inch in diameter

• The Cowboy Latch will keep your gates closed with a simple shaft in sleeve concept.
• ​Designed to be welded on.
  

• The Western Style Gate Closer is 26 inches long Made of 3/4″ rod and has a 12″ Chain.
  
• This component uses the lever principle to close gates.
  
• Excellent choice for barbed wire gates.

• The Double Slam Latch features dual direction operation with a positive locking feature ideal for alleyways.
  
• It is spring operated. The base is seven inches wide and five inches high.

• The Spring Loaded Dead Bolt Pin Latch is designed to be used with the weld-on Striker Plate shown Below.
  
• Fast action means easy one man operation.

• Left or right-handed slam latches are spring operated.
  
• The base is four inches wide and five inches high.

• The Heavy Duty Gate Closer works on the lever principle.
  
• Extremely rugged, yet simple to operate.